Calculate how many gallons of stain you need for decks, fences, furniture, and other wood projects. Get accurate estimates based on wood type, stain type, and number of coats.
3 gallons of oil based penetrating stain covers a 300 sq ft deck of new softwood in two coats, at about 225 sq ft per gallon with 10 percent waste (600 sq ft of coated area total). New softwood soaks up stain, so buy the full amount. Use the calculator below for your exact numbers.
As an Amazon Associate, WorkshopCalc earns from qualifying purchases. Product recommendations are based on your project requirements.
Want to keep this result?
Get this result by email, plus the free Cut List and Board-Foot Calculator (printable PDF) and the beginner workshop tool shopping list.
Free. No spam. Unsubscribe anytime.
Prep and application gear for the stain you just sized
The gallons above only work if the wood takes the stain evenly. These cover conditioning and applying.
Minwax 13407 Clear Pre-Stain Wood Conditioner, 1/2 Pint
Evens out absorption on softwood before the first coat.
Check price on AmazonWooster Brush, 2-Inch, White Z1120-2 Paintbrush
Natural bristle brush for applying each coat.
Check price on AmazonMinwax Wood Finish, Dark Walnut, 1 Quart
A quart-size oil stain for smaller projects.
Check price on AmazonVarathane Premium Fast Dry Dark Walnut Wood Stain
Fast-dry oil stain for interior wood.
Check price on AmazonPicks are based on published specs and owner reviews.
Coverage varies by wood type and stain, but plan for 200-300 sq ft per gallon for the first coat on new wood. Weathered or porous wood absorbs more stain, reducing coverage to 150-200 sq ft per gallon. For a typical 300 sq ft deck with two coats, you'll need 2-3 gallons. Always buy 10% extra for touch-ups and waste.
Oil-based stains typically need 24-48 hours between coats in ideal conditions. Water-based stains dry faster, usually 2-4 hours between coats. Temperature and humidity significantly affect drying times - high humidity or temperatures below 50°F can double drying time. The stain should feel dry to the touch and not tacky before applying the next coat.
Oil-based stains penetrate deeper into the wood, provide richer colors, and typically last longer on outdoor surfaces (3-5 years vs 2-3 years for water-based). They're ideal for decks, fences, and exterior projects. Water-based stains dry faster (2-4 hours vs 24-48 hours), have lower VOCs, clean up with soap and water, and work well for indoor furniture and projects where quick turnaround is important.
Generally no - stain penetrates into the wood rather than building up on the surface like paint. However, if the first coat raises the wood grain (common with water-based stains on bare wood), lightly sand with 220-320 grit sandpaper and wipe clean before the second coat. For best results, always sand bare wood before the first coat to ensure even absorption.
Softwoods like pine, fir, and spruce have uneven grain density that causes blotchy absorption. Apply a pre-stain wood conditioner before staining - this partially seals the wood for more even absorption. Apply conditioner, wait 5-15 minutes, then apply stain while still tacky. Gel stains also work well on softwoods because their thick consistency prevents over-absorption in softer areas.
Most stains allow light foot traffic after 24-48 hours and furniture placement after 72 hours. For oil-based stains, wait 7 days before placing heavy items or subjecting to heavy use. Water-based stains cure faster - typically 3-5 days for full cure. Check the manufacturer's specific recommendations, as formulations vary. Avoid getting the deck wet during the curing period.